manualshive.com logo in svg

Brother P-touch PT-P900, Руководство пользователя, Страница: 132 / 137

Поделиться
Скачать
Brother P-touch PT-P900 Скачать руководство пользователя страница 132

124

18

18

This P-touch Label Printer can be powered by the AC adapter (included) or the rechargeable Li-ion battery 
(optional: PA-BT-4000LI). Use the power source appropriate for your intended use.
With the rechargeable Li-ion battery installed, you can use the P-touch Label Printer in locations that do not 
have AC power.
The battery is recharged by the AC adapter when the battery and the battery base are attached to the P-touch 
Label Printer.

Installing the Rechargeable Li-ion Battery

18

a

Disconnect the AC adapter and then attach the battery base  (optional: PA-BB-002) onto the P-touch 
Label Printer. For more information about attaching the battery base, see its instruction manual.

b

Open the battery cover on the bottom of the P-touch Label Printer.

 

c

Insert the battery into the battery compartment.

 

d

Close the battery cover.

 

Note

The voltage supplied by the rechargeable Li-ion battery fluctuates. The printing speed may also fluctuate 
depending on the voltage.

 

Using the Rechargeable Li-ion 

Battery/Battery Bagse 

(Optional:PA-BT-4000LI/PA-BB-002)

18

Содержание P-touch PT-P900










































































































































Отзывы:

Нет отзывов