Troubleshooting
108
14
Label Problems
14
Problem
Solution
While printing, striped tape appears. The tape cassette is empty.
Install a new tape cassette (see
There is about 1” of blank space at
the leading edge of each printed
label.
Most TZe and HGe labels have a clear laminate top layer. This durable
laminate helps the label withstand abrasion, fading and wet conditions
providing a crisp, readable image. The process of adding this laminate layer
results in the leading edge of blank space. Adjusting the label’s margin or using
the chain printing feature may reduce the amount of blank space.
The label is not cut automatically.
Use P-touch Editor to check the Auto Cut, Chain Printing and Special Tape
settings.
After printing, remove the tape cassette from the P-touch Label Printer and use
scissors to cut the tape.
Be sure to read the instructions provided with tapes and observe all
precautions noted in the instructions.
The printed label contains a blank
horizontal line.
There may be some dust on the print head.
For more information, see
on page 101 and clean the print head
and head roller.
After the labels are cut, they are not
ejected from the printer correctly.
The cutter blade may be dirty.
For more information, see
on page 101 and clean the cutter.
