Brother P-touch PT-D800W Скачать руководство пользователя страница 73

Страница: 73 / 244

Using the Data Transferred to the P-touch Labeling System

Deleting the Transferred Data

Use the following methods to delete transferred data.
Multiple items cannot be deleted together. Delete each item separately.

Deleting Transferred Symbols

Press the

Insert

key, select [

Transferred Symbols

] using the or key, and then press the

Enter

key.

Select the transferred symbol you want to delete using the or key, and then press the

Clear

key.

The [

Delete?

] message appears.

Press the

Enter

key.

The selected transferred symbol is deleted and the next image is selected.
If needed, delete the next image.

Deleting Templates

Select [

Transferred Templates

] in the Home screen using the , ,

key, and then press

the

Enter

key.

Select the template you want to delete using the or key, and then press the

Enter

key.

Select [

Delete

] using or key, and then press the

Enter

key.

The [

Delete?

] message appears.

Press the

Enter

key.

The selected template is deleted and the next template is selected.
If needed, delete the next template.

Deleting Databases

Press the

Insert

key.

Select the database you want to delete using the or key, and then press the

Clear

key.

The [

Delete?

] message appears.

Press the

Enter

key.

The selected database is deleted and the next database is selected.
If needed, delete the next database.

Содержание P-touch PT-D800W





















































































































































































































































Результаты поиска

Содержание P-touch PT-D800W

Отзывы:

Brother P-touch PT-D800W, Руководство пользователя, Страница: 73 / 244

Результаты поиска

Содержание P-touch PT-D800W

Отзывы: