manualshive.com logo in svg

Brother P-touch PT-D800W, Руководство пользователя, Страница: 66 / 244

Поделиться
Скачать
Brother P-touch PT-D800W Скачать руководство пользователя страница 66

Using the Data Transferred to the P-touch Labeling System 

55

3

Using Transferred Database Data

3

Transfer a database converted to a *.csv file to the P-touch labeling system.
Database data transferred without a template can be imported into each label except auto format layouts and 
transferred templates. The database data is imported according to the number of blocks and pages set for 
each label.

Important

• Before using a database, transfer the database to the P-touch labeling system.
• If a database and template are linked and transferred together, the database can use only that template.

 

Note

• If the selected database range is larger than the set number of blocks and pages, the data will be imported 

until the maximum number of blocks and pages is reached.

• If the set number of blocks and pages is larger than the selected database range, the operation will finish 

when the complete database is imported. The remaining blocks and pages will not be printed.

 

a

Press the 

Insert

 key, select [

Database

] using the   or   key, and then press the 

OK

 or 

Enter

 key.

b

Select the database using the   or   key, and then press the 

OK

 or 

Enter

 key.

The first record of the selected database appears.

Note

• If the selected record is not changed within a certain time while the database is displayed, the contents of 

the record will be displayed at the bottom of the screen. However, the contents of the record will not be 
displayed if the record contains 11 one-byte characters or fewer.

• When the 

Preview

 key is pressed, the properties of the record appear.

• When setting the range, the "field names" line (first line of data) cannot be selected.

 

 

Содержание P-touch PT-D800W





















































































































































































































































Отзывы:

Нет отзывов