Brother P-touch PT-D800W Скачать руководство пользователя страница 56

Страница: 56 / 244

Printing a Label Using the P-touch Labeling System Keyboard

Label Preview

Press the

Preview

key.

An image of the label appears on the screen.

1 Indicates the position of the currently displayed portion of the label using the bar.
2 Indicates the information detected for the installed Tape Cassette. The first line indicates the

character color and the second line indicates the tape color.

3 Press the

Preview

key to increase or decrease the magnification of the preview.

4 Indicates the tape width of the installed Tape Cassette and the label length as follows:

Tape width x Label length.

Press the , ,

key to scroll the preview.

To scroll the preview to the left or right end, press the

Shift

key, and then press the

key.

Press the

Preview

key to change the magnification of the preview.

Press

Esc

, or

Enter

to exit Label Preview.

Note

• To print the label directly from the preview screen, press the

Print

key or open the [

Print Options

]

screen and select a print option. (see

Printing Labels

on page 46).

• Print preview may differ slightly from the actual printed label.
• Installed Tape Cassette information (2) cannot be detected in some cassettes.

Содержание P-touch PT-D800W





















































































































































































































































Результаты поиска

Содержание P-touch PT-D800W

Отзывы:

Brother P-touch PT-D800W, Руководство пользователя, Страница: 56 / 244

Результаты поиска

Содержание P-touch PT-D800W

Отзывы: