Brother P-touch PT-D800W Скачать руководство пользователя страница 110

Страница: 110 / 244

Changing System Settings

Printer Setting Tool for Mac

Using the “

Printer Setting Tool

”, specify the printer’s communication settings and device settings from a

Mac. Not only can you change the device settings for one printer, but you can also apply the same settings
to multiple printers.

Note

The “

Printer Setting Tool

” is installed automatically when you use the initial installer to install the printer

driver. For more information, see

Installing the Printer Driver and Software

on page 63.

Important

The “

Printer Setting Tool

” is available only with compatible Brother printers.

Before Using the Printer Setting Tool

Make sure the AC Adapter is connected to the P-touch labeling system and to an AC Power Outlet, or a
fully-charged battery is installed.

Make sure the printer driver has been installed correctly and you can print.

Connect this P-touch labeling system to a computer with a USB Cable. Settings can be specified only via
USB using this tool.

Using the Printer Setting Tool for Mac

Connect the P-touch labeling system you want to configure to the computer.

Click

Macintosh HD

Applications

Brother

Printer Setting Tool

Printer Setting Tool.app

The

Printer Setting Tool

window appears.

Check that the P-touch labeling system you want to configure appears next to

Printer

. If a different

printer appears, select the P-touch labeling system you want from the drop-down list.

Note

If only one P-touch labeling system is connected, it is unnecessary to make a selection because only that
P-touch labeling system will appear.

Select a setting tab, and then specify or change the settings.

Click

Apply Settings to the Printer

in the setting tab to apply the settings to the P-touch labeling

system.

Click

Exit

to finish specifying settings.

Important

Use the Printer Setting Tool to configure the P-touch labeling system only when the P-touch labeling
system is in standby. The P-touch labeling system may malfunction if you try to configure it while it is
handling a job.

Содержание P-touch PT-D800W





















































































































































































































































Результаты поиска

Содержание P-touch PT-D800W

Отзывы:

Brother P-touch PT-D800W, Руководство пользователя, Страница: 110 / 244

Результаты поиска

Содержание P-touch PT-D800W

Отзывы: