Brother P-touch Embelish PT-D215e, Руководство пользователя, Страница: 13 / 17

X
Error messages
X
What to do when...
Troubleshooting
Message Cause / Remedy
Battery Low
! The batteries are weak.
If using AAA alkaline batteries, replace them
with new ones.
If using Ni-MH batteries, charge them fully.
Battery
Empty!
The installed batteries are running low and
need to be replaced for continued operation.
Invalid!
!
selected [
Numbering
].
;r was selected for
[
Numbering
].
;s selected for [
Tab
Length
] or [
Label Length
].
;!! "
tape length while using templates.
No Text
‚ 0
data stored in the memory.
ƒ
entered.
was entered while using templates.
2 Line Limit!
"
1 Line Limit!
0 V!
0
15V4%VP7 16V4%W7
installed. Install a larger tape size.
No
Cassette!
There is no cassette installed.
Cutter
Pressed
+
middle of the printing process.
Text Full!
! %^1
#P1 7
!
Change
Length
0 !! "
8
Auto
!! "
tape length.
No Frame OK?
0
ON, but a cassette narrower than
1234%567%
'*+01234%5677
? #
to cancel.
Feed OK?
8
Chain
Print
] is selected. Refer to the Setting
Margin section in this guide.
Insert
0.47"
AB 1234%567
cassette.
Use TZe
Tape!
B
Problem Solution
The display
stays blank
turned on the
machine.
B!
inserted.
!!B
Bis correctly connected.
When the
!! "
printed out,
there is too
much margin
%7 !
Setting Margin section in this
guide and select [
Half
] , [
Narrow
] or
[
Chain

!! "
The machine
does not print,
or the printed
characters are
not formed
properly.
B
$#
B
correctly.
The setting has
cleared on its
own. !!B
9
#
display settings are cleared.
A blank
horizontal line
appears through
the printed
!! "
! G
! G=
and-down motion.
The machine
has “locked up”
%#
happens when a
key is pressed,
7
Resetting the P-Touch section
in this guide.
The power
turns off when
you try to print. !!B
B!
inserted.
he wrong AC Adapter is used. We
;<=62>?";<=62>?;"
;<=62>?;9";<=62>?;=15";<=62>?;9=15
Adapter.
The tape does
not feed properly
or the tape gets
stuck inside the
machine.
B
the tape guides.
+<
+
;
format settings
need to be
cleared to
create a new
!! "
ƒ
[
Text&Format
].
" 8
Clear
]
"
[
Text&Format
]
To change
language
setting.
Initial Settings section in this
guide.