Brother P-touch E110, Руководство пользователя

Страница: 11 / 17


Preview
• Pressing the Preview key displays a preview
of the label, and may differ from the actual
label when printed.
• If the LCD cannot display all the text at once,
press / to display the hidden text.
• Press / / to exit Preview
mode.
 Feeding (Tape Feed)
• This function feeds approximately 25 mm
of blank tape.
• Do not pull uncut tape from the Tape Cassette
as this may damage the Tape Cassette.
 Printing
Press the Print key to print the text displayed on
the LCD.
 Printing Multiple Copies
• You can print up to nine copies of each label.
• DO NOT touch the Tape Cutter Lever while
the message [
Please Wait
] is displayed on
the LCD.
• To cut tape: When printing ends, push the
Tape Cutter Lever after the message
[
Please Cut
] appears.
• To remove tape backing, fold the tape
lengthwise (with the text facing inward), to
expose the inside edges that run down the
centre of the tape backing. Peel and apply.

Setting Margins
[
Full
] / [
Half
] / [
Narrow
]
Use one of these options to customise margin
length before and after your text.
The printed dots (:) indicate the end of the label.
Cut along the printed dots (:) with scissors.
[
Chain Print
] (tape-saving option)
Use this option to print multiple different labels
with narrow margins. This option saves tape.
1.
Enter your text.
2.
Press .
3.
When [
Feed OK?
] appears on the LCD,
press to change the text.
4.
Clear the text, enter the text you want on the
next label, and then press .
5.
After your last label prints, when [
Feed OK?
]
appears on the LCD, press .
NOTE
• When you use [
Chain Print
], feed the tape
before using the cutter ( + ),
otherwise part of the text may be cut off.
• Do not pull the tape, as this may damage
the Tape Cassette.
• The printed dots (:) indicate the end of the
label. Cut along the printed dots (:) with
scissors.
Printing Labels
+
+ [
Copies:
] / /
-
/
[
Margin
]
/
[
Full
/
Half
/
Narrow
/
Chain Print
]
LCD Printout
Full
Half
Narrow
67mm
ABC
41mm
ABC
25mm
ABC