Brother P-touch 9500PC, Быстрая справка

Страница: 284 / 353

49
In
st
al
li
n
g th
e
so
ft
w
are
Installing P-touch Quick
Editor and the printer driver
Install P-touch Quick Editor to print labels using
simple operations and the printer driver.
1
Start the Macintosh, and then insert the
CD-ROM into the CD-ROM drive.
→
The P-touch window appears.
2
Double-click the Mac OS 9 folder.
→
The Mac OS 9 window appears.
3
Double-click the P-touch Quick Editor
Installer icon.
→
The Installer starts.
4
Confirm the drive to install the software
to, and then click [Install].
To change the drive, click [Drive].
Clicking Custom Install displays a dialog
box that allows you to select which
options to install. Only the options with a
check mark beside them are installed.
Clear the check marks from the programs
you do not want to install.
The programs that can be installed are
listed below.
• If custom installation is not selected, all
of the programs will be installed.
Approximately 20 MB of available
hard-disk space is required.
Note
●
Do not connect the USB interface cable
to the Macintosh until the software has
been installed and the Macintosh has
been restarted. If the USB interface cable
is already connected to the Macintosh,
remove the USB interface cable.
Program Description
P-touch Quick
Editor
P-touch Quick Editor
software
PT-9500PC Driver
Printer driver for the
PT-9500PC