Brother P-Touch 2730 Скачать руководство пользователя

Страница: 50 / 84

EDITING A LABEL

Using Time & Date Function

Time & Date Format Setting

You can select from various formats of date and time to add to your label.

Also, the indication of time can be selected between analog and digital style.

The format applied in this setting will also be applied for the clock display which appears

on the screen when you press the

Display

key. (Refer to “Display Mode” on page 21

for detail.)

Press the

Setup

key to display the Setup menu, select "Time & Date Format"

using the or key, and then press the

Enter

key.

The Time & Date Format screen is displayed.

Select date or time using the or key, and then set the format using the or

key.

Press the

Enter

key to apply the settings.

Time & Date Format Options

New settings are not applied if you do not press the

Enter

key.

• Press the

Escape

key to return to the previous step.

• Press the

Space

key to set the format to default setting.

• Refer to the Format Options for a list of all available formats.

Attribute

Value

(Date)

31/12/2099

31.12.2099

31-12-2099

31.December 2099

31.Dec.2099

12/31/2099

12.31.2099

12-31-2099

December 31, 2099

Dec. 31, 2099

2099/12/31

2099-12-31

Содержание P-Touch 2730





















































































Результаты поиска

Содержание P-Touch 2730

Отзывы:

Похожие инструкции для P-Touch 2730

Бренды по названию

Популярные бренды

Brother P-Touch 2730, Руководство пользователя

Результаты поиска

Содержание P-Touch 2730

Отзывы:

Похожие инструкции для P-Touch 2730

Бренды по названию

Популярные бренды