Brother MFC MFC-290C, Руководство пользователя, Страница: 66 / 168

Chapter 8
52
Setting up groups for
broadcasting
8
If you regularly want to send the same fax
message to many fax numbers you can set
up a Group. Groups are stored on a
Speed Dial number. Each group uses up a
Speed Dial location. You can then send the
fax message to all the numbers stored in a
group just by entering a Speed Dial number,
and then pressing
Black Start .
Before you can add numbers to a Group, you
need to store them as Speed Dial numbers.
You can have up to six small Groups, or you
can assign up to 39 numbers to one large
Group.
a
Press ( Speed Dial ) and
a
or
b
to
choose
Setup Groups
.
Press OK .
b
Use the dial pad to enter the two-digit
Speed Dial number where you want to
store Group.
Press
OK .
c
Use the dial pad to enter a Group
number (1 to 6).
Press
OK .
Setup Group:G0_
d
To add Speed Dial numbers follow the
instructions below:
For example, for Speed Dial numbers
05 and 09. Press
( Speed Dial ), 05 ,
( Speed Dial ), 09 .
The LCD shows:
#05#09
.
G01:#05#09
e
Press OK when you have finished
adding numbers.
f
Use the dial pad to enter a name for the
Group.
Press
OK .
Note
You can easily print a list of all your
Speed Dial numbers. Numbers that are
part of a group will be marked in the
GROUP column. (See
How to print a
report on page 54.)
Dialing access codes and
credit card numbers
8
You can combine more than one Quick Dial
number when you dial. This feature may be
useful if you need to dial an access code for
a cheaper rate long distance carrier.
For example, you might have stored ‘555’ on
Speed Dial #03 and ‘7000’ on Speed Dial
#02. You can use them both to dial ‘555-7000’
if you press the following keys:
( Speed Dial ), OK , #03 , ( Speed Dial ),
#02 , and Start .
Numbers can be added manually by entering
them on the dial pad:
( Speed Dial ), OK , #03 , 7 , 0 , 0 , 1 (on the
dial pad), and Start .
This would dial ‘555–7001’. You can also add
a pause by pressing the
Redial/Pause key.