Brother MFC MFC-290C, Руководство пользователя, Страница: 112 / 168

98
Poor fax send quality. Try changing your resolution to
Fine
or
S.Fine
. Make a copy to check your
machine's scanner operation. If the copy quality is not good, clean the scanner.
(See
Cleaning the scanner on page 114.)
Vertical black lines when sending.
(MFC-290C only)
If the copy you made shows the same problem, clean the scanner. (See Cleaning
the scanner on page 114.)
Handling Incoming Calls
Difficulty Suggestions
The machine ‘Hears’ a voice as a
CNG Tone. If Easy Receive is set to On, your machine is more sensitive to sounds. It may
mistakenly interpret certain voices or music on the line as a fax machine calling
and respond with fax receiving tones. Deactivate the machine by pressing
Stop/Exit . Try avoiding this problem by turning Easy Receive Off. ( See Easy
Receive on page 37.)
Sending a fax call to the machine. If you answered at the machine, press Black Start and hang up at once. If you
answered on an extension telephone, press your Fax Receive Code (default
setting is
l
51). If you answer on an external telephone (connected to the EXT
jack), press Start to receive the fax. When your machine answers, hang up.
Custom features on a single line. If you have Call Waiting, Call Waiting/Caller ID, Voice Mail, an alarm system or
other custom feature on a single telephone line with your machine, it may create
a problem sending or receiving faxes.
For example: If you subscribe to Call Waiting or some other custom service and
it signal comes through the line while your machine is sending or receiving a fax,
the signal can temporarily interrupt or disrupt the faxes. Brother's ECM feature
should help overcome this problem. This condition is related to the telephone
system industry and is common to all devices that send and receive information
on a single, shared line with custom features. If avoiding a slight interruption is
crucial to your business, a separate telephone line with no custom features is
recommended.
Menu Setting Difficulties
Difficulty Suggestions
The machine beeps when you try to
access the Setup Send or Setup
Receive menu.
If the Fax key is not illuminated, press it to turn on Fax mode. The Setup
Send or Setup Receive setting is available only when the machine is in Fax mode.
Sending Faxes (continued)
Difficulty Suggestions