Brother MFC-J6510DW, Руководство по обслуживанию

Страница: 341 / 394

5-37 Confidential
5.1.4.17 Checking of CIS Travel (Function code 59)
„
Function
This procedure allows you to check the movement of the CIS unit integrated in the scanner
cover (scanner unit). The CIS unit travels to the three positions--the white reference film
position, scanning start and end positions.
„
Operating Procedure
-- Check the movement of the CIS unit --
(1) Press the 5 and 9 keys in this order in the initial stage of the maintenance mode.
Simplex scanning models
The "1:MONO 2:COLOR?" appears on the LCD.
Duplex scanning models
The "CIS 1:FB 2:ADF" appears on the LCD.
Press the
1 key to display "1: MONO 2:COLOR?"
(2) To call up the CIS travel menu, press the 1 key.
(The "2:COLOR" is for checking scanning clocks at the factory, so do not access it.)
The "RESO TYPE SET 1" appears on the LCD.
(3) Press the OK key ( PHOTO CAPTURE key for models without OK key).
The "LED PWM : **" appears on the LCD.
(4) Press the OK key ( PHOTO CAPTURE key for models without OK key).
The "G PULSE : ****" appears on the LCD.
(5) Press the OK key ( PHOTO CAPTURE key for models without OK key).
The "1:WHT 2:FRT 3:MV" appears.
(6) Press the 3, 1, or 2 key, then press the OK key ( PHOTO CAPTURE key for models
without OK key).
The CIS unit moves to the scanning end position, white reference film position, or scanning
start position, respectively.
(7) Press the Stop/Exit key, and the CIS unit returns to the home position.
The machine returns to the initial stage of the maintenance mode.