Brother MFC-J6510DW Скачать руководство пользователя страница 326 | Manualshive

Страница: 326 / 394

Brother MFC-J6510DW Скачать руководство пользователя страница 326

5-22

Confidential

5.1.4.11 Backup of Machine Information

(Function code 46) (User-accessible)

Function

This procedure backs up the following machine information and user setting information into
an external memory (memory card or USB flash memory) and restores it when necessary.

- Machine information (Preset values, count values, error information, machine specifications

data, etc.)

- User setting information (Telephone directory, password, station ID, transfer information,

telephone area code, user settings, etc.)

- Other data (Received fax data, ICM/OGM data, etc.)

Note that the following information cannot be backed up.

- Serial number of the machine
- MAC address
- Call and caller ID records
- Activity report
- Fax data to be sent (by delayed-timer, redialing, and polling)
- Head calibration data

NOTE:

The user can use the backup and restoration (given on the next page) procedures,

except "Import all" in the restoration procedure.

NOTE:

An external memory (memory card or USB flash memory) for backup should have a

free space larger than the RAM size of the machine.

NOTE:

When performing this procedure for any other machine with the same external

memory, delete the data previously stored in the external memory.

NOTE:

Do not use a Memory Stick; using it may fail to transfer data correctly.

Backup Procedure

(1) On the PC, create a "Brother" folder in an external memory to be used for saving backup

data.

(2) Insert the external memory into the slot of the machine in the initial stage of the

maintenance mode.

The "**** Active" appears on the LCD. (**** shows the name of the external memory
inserted.)

NOTE:

Do not insert more than one external memory at a time.

NOTE:

If the external memory inserted already contains backup data of the same model,

the existing data will be overwritten with new data.

(3) Press the

4

and

6

keys in this order.

The "Export to Card" appears on the LCD.

(4) Press the

Black Start

(

Mono Start

) key.

The "********.msd" appears on the LCD. The "********" is unique to each model.

(5) Press the

Black Start

(

Mono Start

) key.

The "Export to Card" appears again on the LCD.

(6) Press the

Black Start

(

Mono Start

) key.

The "Please wait" appears on the LCD.

NOTE:

Never remove the external memory from the machine when the exporting is in

progress.

NOTE:

If this procedure has been started with the user-access (see

), the machine

returns to the standby state after showing the "Please wait" on the LCD.

«
...
324
325
326
327
328
...
»

Содержание MFC-J6510DW











































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды