Brother MFC-J4335DW, Онлайн руководство пользователя

Страница: 345 / 635

Home > Security > Configure Certificates for Device Security > Create a Self-signed Certificate
Create a Self-signed Certificate
1. Start your web browser.
2. Type "https://machine's IP address" in your browser's address bar (where "machine's IP address" is the
machine's IP address).
For example:
https://192.168.1.2
• If you are using a Domain Name System or enable a NetBIOS name, you can type another name, such
as "SharedPrinter" instead of the IP address.
-
For example:
https://SharedPrinter
If you enable a NetBIOS name, you can also use the node name.
-
For example:
https://brnxxxxxxxxxxxx
The NetBIOS name can be found in the Network Configuration Report.
3. If required, type the password in the Login field, and then click Login .
The default password to manage this machine’s settings is located on the back of the machine and marked
"
Pwd ".
4. Go to the navigation menu, and then click Network > Security > Certificate .
Start from , if the navigation menu is not shown on the left side of the screen.
5. Click Create Self-Signed Certificate .
6. Enter a Common Name and a Valid Date .
• The length of the Common Name is less than 64 bytes. Enter an identifier, such as an IP address, node
name, or domain name to use when accessing this machine through SSL/TLS communication. The node
name is displayed by default.
• A warning will appear if you use the IPPS or HTTPS protocol and enter a different name in the URL than
the
Common Name that was used for the self-signed certificate.
7. Select your setting from the Public Key Algorithm drop-down list. The default setting is RSA(2048bit) .
8. Select your setting from the Digest Algorithm drop-down list. The default setting is SHA256 .
9. Click Submit .
Related Information
• Configure Certificates for Device Security
Related Topics:
• Access Web Based Management
338