Brother MFC-J3540DW, Онлайн руководство пользователя

Страница: 417 / 575

Home > Troubleshooting > Error and Maintenance Messages
Error and Maintenance Messages
As with any sophisticated office product, errors may occur and supply items may have to be replaced. If this
happens, your machine identifies the error or required routine maintenance and shows the appropriate message.
The most common error and maintenance messages are shown in the table.
You can correct most errors and perform routine maintenance yourself. If you need more tips, go to your model's
FAQs & Troubleshooting page at support.brother.com .
• (MFC-J3940DW)
If the touchscreen displays errors and your Android
™
device supports the NFC feature, touch your
device to the NFC symbol on the control panel and browse the latest FAQs from your device. (Your
mobile telephone provider's message and data rates may apply.)
Make sure the NFC settings of both your Brother machine and your Android
™
device are set to On.
• Related Information references are at the bottom of this page.
Error Message Cause Action
B&W Print Only One or more of the colour ink cartridges
have reached the end of their lives.
You can use the machine in monochrome
mode for approximately four weeks
depending on the number of pages you
print.
While this message appears on the LCD,
each operation works in the following way:
•
Printing
If the media type is set to
Plain Paper
and you selected Greyscale in the
printer driver, you can use the machine
as a monochrome printer.
• Copying
If the paper type is set to
Plain
Paper
, you can make copies in
monochrome.
• Faxing
If the paper type is set to
Plain
Paper
, the machine will receive and
print the faxes in monochrome.
Replace the ink cartridges.
See
Related Information : Replace the Ink
Cartridges .
Although the Cause column lists options
for using the machine after this error
appears, you may not be able to use the
machine until you replace one or more of
the ink cartridges under the following
condition:
•
If you unplug the machine or remove
the ink cartridge.
Cannot Clean XX
Cannot Initialise XX
Cannot Print XX The machine has a mechanical problem.
-
OR -
A foreign object, such as a paper clip or a
piece of ripped paper, is in the machine.
Open the scanner cover and remove any
foreign objects and paper scraps from
inside the machine. If the error message
continues, disconnect the machine from
the power for several minutes, and then
reconnect it.
You can try additional clear paper jam
operations.
See
Related Information : Remove Paper
Scraps .
(If you cannot print documents and
received faxes, transfer them to another
fax machine or to your computer.)
See
Related Information : Transfer Your
Faxes or Fax Journal Report .
Cannot Detect You installed a new ink cartridge too
quickly and the machine did not detect it. Take out the new ink cartridge and
reinstall it slowly and firmly until it locks
into place.
410