Brother MFC-9700, Руководство пользователя, Страница: 75 / 228

A U T O D I A L N U M B E R S A N D D I A L I N G O P T I O N S
7 - 5
Broadcasting
Broadcasting is automatically sending the same fax message to multiple fax
numbers. Using the
Set key, you can include Groups, One Touch locations,
Speed Dial locations and up to 50 manually dialed numbers. The easiest way to
Broadcast is to press Group keys. If you did not use up any locations for Groups,
access codes or credit card numbers, you can “broadcast” faxes automatically to
up to 158 different locations from the MFC. However, available memory will
vary with all types of jobs in memory and numbers of locations used for
broadcasting. If you broadcast to more than the maximum locations available,
you will not be able to set up transmissions using dual access and the timer.
(See
Setting Up Groups for Broadcasting
, page 7-2.)
You must press Set between each of these locations.
Use the Search/Speed Dial to help you choose the numbers easily.
After the broadcast is finished, a Broadcast Report will be printed automatically
to let you know the results.
■
To stop the broadcasting in progress, press Stop/Exit . The LCD asks if you
want to cancel all locations or only the location that is being sent.
■
Enter the long dialing sequence numbers as you normally would. Keep in mind
that each key counts as one location, so the number of locations you can call
becomes limited.
■
If the line is busy or for other reasons a connection could not be made while
broadcasting, the MFC will redial the number automatically.
■
If the memory is full, press Stop/Exit to abort the job; or, if more than one page
has been scanned, press Fax Start to send the portion that is in the memory.
1
Place the original face up in the ADF, or face down on the scanner glass.
2
Enter a number using One Touch, Speed Dial, Group number, Search or the dial
pad.
Example: Group number
3
Press Set . You will be prompted to press the next number.
4
Enter the next number.
Example: Speed Dial number
5
Press Set .
6
Enter the fax number.
Example: Manual dialing using the dial pad.
7
Press Fax Start .
Your MFC will read the original into memory and then start sending faxes to the
numbers you entered.