manualshive.com logo in svg

Brother MFC-9180, Руководство пользователя

Поделиться
Скачать
Brother MFC-9180 Скачать руководство пользователя страница 139

   Troubleshooting and Maintenance   

131

MAINTENANCE

Replacing the Toner Cartridge

The machine can print approximately 2,200 pages with one toner cartridge (TN-8000). When the 
toner cartridge is running low, the display shows CHANGE TONER. The machine is supplied with 
a starter toner cartridge that must be replaced after approximately 2,200 pages. Actual page count 
will vary depending on your average document type (i.e. standard letter, detailed graphics). The 
above specifications relate to a 5% black coverage A4 size document.

It is a good idea to keep a new toner cartridge ready for use when you see the toner low warning.

Discard the used toner cartridge according to local regulations. If you are not sure of them, consult 
with Brother dealer for service. Be sure to seal the toner cartridge tightly so toner powder does not 
spill out of the cartridge. When discarding used toner cartridges, keep them separate from domestic 
waste.

It is recommended that you clean the machine when you replace the toner.

Toner Empty Indicator

When the toner cartridge is running low, the display shows CHANGE TONER and the Toner 
Empty LED on the control panel flashes on and off to indicate the toner is low.

The Toner Empty LED light stays on and the display shows TONER EMPTY to indicate that the 
toner is empty. Once this indication appears, the machine will not resume printing until you have 
installed a new toner cartridge.

Steps for Replacing Toner Cartridge

After you have just used the machine, some internal parts of the machine 
will be extremely HOT! So, never touch the shaded parts shown in the 
illustration below.

Display

Toner Empty Icon

Содержание MFC-9180




































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды