Brother MFC-9140CDN, Руководство пользователя

Страница: 60 / 243

Chapter 7
50
External and extension
telephones
7
NOTE
You must turn the Remote Codes setting
to on to use the Remote Activation Code
l 51 and Remote Deactivation Code #51
(see Using Remote Codes on page 51).
Connecting an external or
extension telephone
7
You can connect a separate telephone
directly to your machine as shown in the
diagram below.
1 Extension telephone
2 External telephone
3 Protective Cap
Operation from external or
extension telephones
7
If you answer a fax call on an extension
telephone, or an external telephone that is
correctly connected to the machine into the
correct socket on the machine, you can make
your machine take the call by using the
Remote Activation code. When you press the
Remote Activation code
l 51 the machine
starts to receive the fax.
If you answer a call and no one is on the line:
You should assume that you’re receiving a
manual fax.
Press l 51 and wait for the chirp or until the
Touchscreen shows
Receiving
, and then
hang up.
NOTE
You can also use the Fax Detect feature to
make your machine automatically take the
call (see
Fax Detect on page 42).
For Fax/Tel mode only
7
When the machine is in Fax/Tel mode, it will
use the F/T Ring Time (fast double-ringing) to
alert you to pick up a voice call.
Lift the external telephone’s handset, and
then press
Pickup
to answer.
If you are at an extension telephone, you will
need to lift the handset during the F/T Ring
Time and then press
#51 between the fast
double-rings. If no one is on the line, or if
someone wants to send you a fax, send the
call back to the machine by pressing
l
51 .
1
3
2