Brother MFC-9*970CDW, Руководство пользователя программного обеспечения, Страница: 217 / 229

Network Scanning
210
13
f
Press
a
or
b
to choose the destination computer you want to send to.
Press OK .
If the LCD prompts you to enter a PIN number, enter the 4-digit PIN number for the destination computer
on the control panel.
Press
OK .
g
Press Black Start or Color Start .
The machine starts the scanning process.
Note
• Scan type depends on the settings of the Device Scan Settings screen of ControlCenter4 or
Device Button tab of the ControlCenter2 configuration screen. Black Start or Color Start do not change
the settings.
• If you want to change between color and black and white scanning, choose color or black and white in the
scan type option on the Device Scan Settings screen of ControlCenter4 or Device Button tab of the
ControlCenter2 configuration screen. (For Windows
®
, see Configuring Scan button settings on page 73
for Home Mode or Configuring Scan button settings on page 84 for Advanced Mode . For Macintosh, see
SCAN on page 168.)
• If you would like to change the file name of scanned documents, enter the file name in the File Name
section on the Device Scan Settings screen of ControlCenter4 or Device Button tab of the
ControlCenter2 configuration screen.
• If you want to change the default file size, choose your preferred rate by moving the scroll bar on the
Device Scan Settings screen of ControlCenter4 or Device Button tab of the ControlCenter2
configuration screen.
Scan to FTP
13
When you choose Scan to FTP, you can scan a black and white or color document directly to an FTP server
on your local network, or on the internet.
The details required to use Scan to FTP can be entered by using Web Based Management to pre-configure
and store the details in an FTP Profile.
Note
• Scan to FTP is available when FTP profiles are configured by using Web Based Management.
• We recommend Microsoft
®
Internet Explorer
®
6.0 (or greater) or Firefox 3.0 (or greater) for Windows
®
and
Safari 3.0 (or greater) for Macintosh. Please also make sure that JavaScript and Cookies are always
enabled in whichever browser you use. If a different web browser is used, make sure it is compatible with
HTTP 1.0 and HTTP 1.1.
To use Web Based Management, type
http://xxx.xxx.xxx.xxx
(where xxx.xxx.xxx.xxx is the IP
address of your machine) into your browser, and then you can configure or change the settings in
FTP/Network Scan Profile in Administrator Settings . You can configure up to ten FTP server profiles and
you can choose what profile numbers (1 to 10) to use for Scan to FTP settings in FTP/Network Scan
Settings .