Brother MFC-8220, Руководство пользователя

Страница: 72 / 218

5 - 9 SETUP RECEIVE
Advanced receiving operations
Operation from extension telephones
If you answer a fax call on an extension telephone, or an external
telephone into the correct socket on the machine, you can make your
MFC take the call by using the Remote Activation Code. When you
press the Remote Activation Code
51
(
91
for New Zealand),
the MFC starts to receive a fax.
(See
Fax Detect on page 5-5.)
If the MFC answers a voice call and pseudo/double-rings for you to
take over, use the Deactivation Code
#51
(
#91
for New Zealand) to
take the call at an extension phone. (See Setting the F/T Ring Time
(Fax/Tel mode only) on page 5-4.)
If you answer a call and no one is on the line, you should assume that
you’re receiving a manual fax.
■
At an extension phone (on a separate telephone wall
socket/phone socket), press
51
(
91
for New Zealand), wait
for fax-receiving tones (chirps), and then hang up.
■
At an external phone (connected to the MFC’s EXT socket),
press
51
(
91
for New Zealand) and wait for the phone to be
disconnected before you hang up (the LCD shows
Receiving
).
Your caller will have to press
Start
to send the fax.
For Fax/Tel mode only
When the MFC is in Fax/Tel mode, it will use the F/T Ring Time
(pseudo/double-ringing) to alert you to pick up a voice call.
If you’re at the MFC, you can lift the handset to answer.
If you’re at an extension phone, you will need to lift the handset
during the F/T Ring Time and then press
#51
(
#91
for New Zealand)
between the double rings. If no one is on the line, or if someone
wants to send you a fax, send the call back to the MFC by pressing
51
(
91
for New Zealand).