Brother MFC-8220, Руководство по обслуживанию

Страница: 302 / 328

APPENDIX 3 FIRMWARE SWITCHS (WSW)
A-38
WSW37 (Function setting 15)
Selector
No.
Function Setting and Specifications
1
Printout of the stored image data of
an unsent document onto the error
report
0: No 1: Yes
2
Erasure of the stored image data of
an unsent document at the time of
the subsequent in-memory
message transmission
0: No 1: Yes
3
|
8
Not used.
l Selector 1: Printout of the stored image data of an unsent document onto an error report
This selector determines whether or not the 1st-page image data of a document will be
printed out onto the error report if the document image data stored in the temporary memory
cannot be transmitted normally.
l
Selector 2: Erasure of the stored image data of an unsent document at the time of the
subsequent in-memory message transmission
If in-memory message transmission fails repeatedly when selector 1 is set to "1," the
temporary memory will be occupied with image data. Setting selector 2 to "1" will
automatically erase the stored 1st-page image data of an unsent document at the time of the
subsequent in-memory message transmission only when recording paper or toner runs out.