Brother MFC-7340 Скачать руководство пользователя страница 49

Страница: 49 / 194

Sending a fax

Sending in real time for all faxes

Make sure you are in Fax mode

Press

Menu

Press

to choose

Press

Sending in real time for the next fax
only

Make sure you are in Fax mode

Press

Menu

Press

to choose

Next Fax:On

Press

Not sending in real time for the next
fax only

Make sure you are in Fax mode

Press

Menu

Press

to choose

Next Fax:Off

Press

Overseas mode

If you are having difficulty sending a fax
overseas due to a bad connection, then
turning on the overseas mode may help.

This is a temporary setting, and will only be
active for your next fax.

Make sure you are in Fax mode

Load your document.

Press

Menu

Press

to choose

Off

Press

Delayed fax

You can store up to 50 faxes in the memory
to be sent within a twenty four hour period.

Make sure you are in Fax mode

Load your document.

Press

Menu

Enter the time you want the fax to be
sent (in 24-hour format).

(For example, enter 19:45 for 7:45 PM)

Press

Note

The number of pages you can scan into
the memory depends on the amount of
data printed on each page.

Delayed batch transmission

Before sending the delayed faxes, your
machine will help you economize by sorting
all the faxes in the memory by destination and
scheduled time.

All delayed faxes that are scheduled to be
sent at the same time to the same fax number
will be sent as one fax to save transmission
time.

Make sure you are in Fax mode

Press

Menu

Press

to choose

Off

Press

Stop/Exit

Содержание MFC-7340



































































































































































































Результаты поиска

Содержание MFC-7340

Отзывы:

Brother MFC-7340, Руководство пользователя, Страница: 49 / 194

Результаты поиска

Содержание MFC-7340

Отзывы: