Brother MFC-7340 Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 194

Brother MFC-7340 Скачать руководство пользователя страница 21

Loading paper and documents

11

2

b

Open the manual feed slot cover.

c

Using both hands, slide the manual feed
slot paper guides to the width of the
paper that you are going to use.

d

Using both hands, put one sheet of
paper or one transparency in the
manual feed slot until the front edge
touches the paper feed roller. When you
feel the machine pull in the paper, let go.

Printing on thick paper, bond paper,
labels and envelopes

2

When the back output tray is pulled down, the
machine has a straight paper path from the
manual feed slot through to the back of the
machine. Use this paper feed and output
method when you want to print on thick
paper, labels or envelopes.

Note

• Remove each printed sheet or envelope

immediately to prevent a paper jam.

• The machine automatically turns on the

Manual Feed mode when you put paper in
the manual feed slot.

a

Open the back cover (back output tray).

b

Open the manual feed slot cover.

«
...
19
20
21
22
23
...
»

Содержание MFC-7340



































































































































































































Отзывы:

Нет отзывов