Dialing and storing numbers
45
8
Changing Speed-Dial
numbers
8
If you try to store a Speed-Dial number where
a number has already been stored, the LCD
will show the name or number that has been
stored there, and will ask you to do one of the
following:
Press
1
to change the stored number.
#05:Mike
1.Change 2.Exit
Press
2
to exit without making a change.
If you chose
1
, you will be able to change the
stored number and name, or enter a new one.
Follow the instructions below:
a
Enter a new number. Press
OK
.
b
Enter a new name. Press
OK
.
To change a character, use
d
or
c
to
position the cursor under the character
you want to change, then press
Clear/Back
. Re-enter the character.
Setting up groups for
broadcasting
8
If you regularly want to send the same fax
message to many fax numbers you can set
up a Group. Groups are stored on a Speed-
Dial number. Each group uses up a Speed-
Dial location. You can then send the fax
message to all the numbers stored in a group
just by entering a Speed-Dial number, and
then pressing
Black Start
.
Before you can add numbers to a Group, you
need to store them as Speed-Dial numbers.
You can have up to six small Groups, or you
can assign up to 39 numbers to one large
Group.
a
Press
Menu
,
2
,
3
,
2
.
3.Set Quick-Dial
2.Setup Groups
b
Use the dial pad to enter the two-digit
Speed-Dial number where you want to
store the Group.
Press
OK
.
c
Use the dial pad to enter a Group
number (1 to 6).
Press
OK
.
Setup Group:G01
d
To add Speed-Dial numbers follow the
instructions below:
For example, for Speed-Dial numbers
05 and 09, Press
Search/Speed Dial
,
05,
Search/Speed Dial
, 09.
The LCD shows :
#05#09
.
G01:#05#09
e
Press
OK
when you have finished
adding numbers.
f
Use the dial pad to enter a name for the
Group.
Press
OK
.
g
Press
Stop/Exit
.
Note
You can easily print a list of all your
Speed-Dial numbers. Numbers that are
part of a group will be marked in the
GROUP column. (See
Содержание MCF-240CW
