Brother Intelli FAX-2820 Скачать руководство пользователя страница 179

Страница: 179 / 321

8-25

Confidential

8.4.16 Machine Error Code Indication (Function code 82)

Function

This function displays an error code of the last error on the LCD.

Operating

Procedure

(1) Press the

and

keys in this order in the initial stage of the maintenance mode.

The LCD shows the "MACHINE ERROR X X."

(2) Press the

Stop/Exit

key. Return to the initial stage of the maintenance mode.

8.4.17 Output of Transmission Log to the Telephone Line (Function code 87)

Function

This function outputs the transmission log (that the machine has stored about the latest

transmission) to the telephone line. It allows the service personnel to receive the

transmission log of the user's machine at a remote location and use it for analyzing problems

arising in the user's machine.

Operating

Procedure

(1) If the user's machine has a transmission-related problem, call the user's machine at a

remote location from your machine.

(2) If the line is connected, have the user perform the following:

1) Hook up the handset.
2) Press

the

Menu/Set

Start, Menu/Set, Start

keys in this order.

3) Press

the

and

keys.

The above operation makes the user's machine send CNG to your machine for
sending the transmission log.

(3) If you hear the CNG sent from the user's machine, press the

Start

key of your machine.

Your machine will start to receive the transmission log from the user's machine.

8.4.18 Cancellation of the Memory Security Mode

Function

This procedure can cancel the memory security mode. Use this procedure if the user forgets

his/her password entered when setting the memory security mode so as not to exit from the

memory security mode.

NOTE:

Carrying out this procedure will lose passwords previously entered but retain FAX

messages received in the memory security mode.

Operating

Procedure

(1) When the SECURE MODE is displayed on the LCD, press the

Menu/Set

key and

key

together. Within two seconds, start to press the

and

keys.

The memory security mode will be canceled and the machine returns to the calendar

clock screen.

Содержание Intelli FAX-2820


































































































































































































































































































































Результаты поиска

Содержание Intelli FAX-2820

Отзывы:

Похожие инструкции для Intelli FAX-2820

Бренды по названию

Популярные бренды

Brother Intelli FAX-2820, Руководство по обслуживанию

Результаты поиска

Содержание Intelli FAX-2820

Отзывы:

Похожие инструкции для Intelli FAX-2820

Бренды по названию

Популярные бренды