Brother Innov-is NX600, Руководство по обслуживанию

Страница: 159 / 214

4 - 5
Test Mode
Inspection and
Adj
u
st
ment
Test Modes (When changing modes, turn the power off, and restart the test mode)
Mode Mode selection button Z (zigzag)
operations
F (feed)
operations
Operating speed
3 point needle
drop
With front cover
in place
Press twice, select
and press .
Switches left base
line / center base
line / right base line
with each stitch
*Pressing /
SW5 stops the base
line from changing
0 mm
(none)
Any speed may be
selected using the
speed control key
Without front
cover
in place
SW5
Switches low /
middle / high speed
with each push of
SW3.
Feed forward
and reverse
With front cover
in place
Press five times,
select and press . 100 stitches forward on the left
base line
100 stitches reverse on the right
baseline
Switches low /
middle / high speed
with each push of the
.
Without front
cover
in place
SW3
Switches low /
middle / high speed
with each push of
SW5.
Feed dog
position
With front cover
in place Press , select and
press .
Each time you press
, the feed dog
changes position left
/ center / right.
None Cannot be adjusted
Side feed line With front cover
in place
Press , select and
press twice.
Horseshoe pattern sewing Cannot be adjusted
One-point
pattern
With front cover
in place
Press , select and
press .
One-point pattern sewing Cannot be adjusted