Brother Innov-is NX600, Руководство по обслуживанию

Страница: 154 / 214

3 - 78
Thread cutter module Modules
10
Grease applications
1. Apply a small amount of Epnoc Grease AP to the all of the operating
surfaces
1
of the idle gear assy. and C pulse motor gear.
2. Apply a small amount of Epnoc Grease AP to the all of the operating
surfaces
2
of the thread cutter lever gear and idle gear assy.
3. Apply a small amount of Epnoc Grease AP to the entire operating surface
3
of the thread cutter lever thread hook pin A.
Apply Epnoc Grease AP to the entire operating surfaces
of idle gears A and B and the CPM gear.
Small amount
Apply Epnoc Grease AP to the to the operating
surfaces of the thread cutter lever gear and idle gears
A and B
Small amount
Apply Epnoc Grease AP to the operating surface of thread
hook pin A
Small amount
2
1 3
11
Thread cutter frame assy. attachment
1. Attach a polyester slider
1
to thread hook pin A
2
.
2. Attach the thread cutter frame assy.
3
and collars
4
(two) to the motor
holder assy.
5
using the screws
1
(two).
*Key point
• Align the thread cutter lever shaft
6
and thread cutter frame
hole 7 , and the thread hook pin A and thread cutter lever hole
8
.
Start movie clip (CD-ROM version only)
1
Torque
1.18 – 1.57 N·m
5
1
1
2
4
3
6 7
8
Screw, Bind
M 4X20
Color; Silver
12
CPM lead processing
1. Attach the CPM leads to the motor holder
2
using a band
1
.
Start movie clip (CD-ROM version only)
2
1