Brother Innov-is NX600, Руководство по обслуживанию

Страница: 137 / 214

3 - 61
Feed module Modules
Assembly
1
Drop knob attachment
1. Attach retaining rings E2 (two) to slide shafts B
1
(two).
2. Attach the drop knob
2
and to slide shaft B assembly
1
(two) to the feed
base
3
, and attach retaining rings E2 (two).
3. Apply a small amount of Molykote EM30L to the drop knob
2
.
4. Attach the spring plate
4
using the screw
1
.
Start movie clip (CD-ROM version only)
Apply Molykote EM30L grease to the sliding parts of
the drop knob and spring plate
Small amount
1
Torque
0.78 – 1.18 N·m
1
1
2
3
2 Retaining ring E2 Retaining
ring E2
Retaining ring E2 Retaining ring E2
4 1
*Inside
view
*Outside
Screw, Bind
M 3X4
Color; Silver
2
Drop assy. assembly
1. Attach retaining ring E3 to the vertical feed shaft
1
.
2. Attach the vertical feed shaft assy.
1
, polyester slider
2
, set screw collar
4
3
, vertical lever
4
, and to the vertical supporting plate
5
, and
attach retaining ring E3.
3. Hand start the screw
1
in set screw collar 4
3
.
(Fully tighten after 3 - 67 "11. Lower shaft B assy. attachment.")
4. Apply 1 – 2 drops of Sewing Lube to the vertical feed shaft assy.
1
.
Start movie clip (CD-ROM version only)
Lubricate the vertical feed shaft with sewing lube. 1 – 2 drops
1
Torque
Hand tighten
S18
2
3
Retaining
ring E3
Retaining
ring E3
S18
1
1
4
5
S18
Set Screw, Socket (CP)
M4X4
Color; Black
11
5.7
SPRING
XC2550***