Brother Innov-is NX600, Руководство по обслуживанию

Страница: 116 / 214

3 - 40
Main parts Main unit
16
Face plate assembly
1. Attach the needle thread lever shaft
1
, needle thread lever
2
and rubber
washer
3
to the face plate.
2. Attach to the presser plate
4
.
3. Attach the presser plate
4
to the face plate using the screw
1
.
4. Attach the screw
2
and a washer.
5. Attach the that was attached to the presser plate
4
in 2. to the needle
thread lever
2
.
6. Attach the retaining ring, CS5 and the NT lower thread cutter
5
to the face
plate.
7. Attach the needle thread lever knob
6
.
1
Torque
0.57 – 1.78 N·m
2
Torque
0.57 – 0.78 N·m
S01
1 2
4 3
S01
2 5
1
2
S01
S01
Taptite, Pan B
M3X6
Color; Silver
Taptite, Bind B
M3X10
Color; Gold
THREAD THROUGH LEVER SPRING
138260***
23
4
17
Face plate assy. attachment
1. Align and attach the hole
1
in the center on the inside of the face plate to
the shaft
2
on the needle-presser module.
2. Secure the face plate assy. to the arm bed with the screw
1
.
Start movie clip (CD-ROM version only)
1
Torque
0.78 – 1.18 N·m
1
2 1
Screw, Pan (S/P washer)
M4X14
Color; Silver
18
Accessory table assembly and attachment
1. Attach the accessory table door to the accessory table
1
.
2. Attach the accessory table
1
to the main unit.
1