Brother Innov-is NX600, Руководство по обслуживанию

Страница: 112 / 214

3 - 36
Main parts Main unit
6
Front cover assembly (spool pin attachment)
1. Attach the spool pin
1
to the spool pin holder assembly
2
.
2. Attach the spool pin holder assembly
2
using the screw
1
.
3. Attach the thread bobbin cover
3
using the screws
2
(two).
Start movie clip (CD-ROM version only)
1
Torque
0.57 – 0.78 N·m
2
Torque
0.57 – 0.78 N·m
2
1
2 1
3
Taptite, Cup B
M 3X10
Color; Gold
Taptite, Bind B
M 3X8
Color; Gold
7
Front cover assembly (assembling bobbin winder guide
assembly)
1. Attach the bobbin winder guide assembly
1
to the front cover.
2. Hand start the screw
1
.
(Fully tighten after 4 - 18 "Bobbin winder adjustment.")
Start movie clip (CD-ROM version only)
1
Torque
0.57 – 0.78 N·m
1
1
Screw, Pan (S/P washer)
M3X8DA
Color; Gold
8
LCD panel attachment
1. Attach the LCD panel
1
and the board pressers (two) to the operation
PCB holder using the screws
1
(two).
1
Torque
0.57 – 0.78 N·m
1
2 1
Taptite, Bind B
M3X10
Color; Gold