Brother Innov-is NV4000D, Руководство по обслуживанию

Страница: 182 / 381

3 - 50
Main parts Main unit
14
Front cover assembly (inverter D6 assembly attachment)
1. Attach inverter D6
1
to the inverter cover
2
with the 2 screws
1
.
*Key point
• Tighten the screws 1 in the following order: 1 -1 (temporarily
tighten),
1
-2 (fully tighten), and
1
-1 (fully tighten).
2. Insert the inverter lead wire
3
into the right connector
4
of inverter D6.
3. Insert the LCDKCG089 lead wire
5
from the lower section inside the
front cover into the left connector
6
of inverter D6.
4. Attach the inverter D6 assembly to the rear of the front cover with the 2
screws
2
(a clip is secured to the right screw).
*Key point
• Pass the LCDKCG089 lead wire 5 through the notch on the
inverter D6 assembly.
• Tighten the screws 2 in the following order: 2 -1 (temporarily
tighten),
2
-2 (fully tighten), and
2
-1 (fully tighten).
5. Insert the clip on the right screw
2
through the ferrite core of the foot
controller jack assembly.
Start movie clip (CD-ROM version only)
1
Torque
0.39 – 0.79 N
·
m
2
Torque
0.39 – 0.79 N
·
m
1 2
1 -2
2
-1
2
-2
1 -1
5 4 3
7
6
Taptite, Bind B
M 3X8
Color; Gold
Taptite, Bind B
M 3X8
Color; Gold
15
Front cover assembly (plate D attachment)
1. Attach plate D
1
to the rear of the front cover with the screw
1
.
*Key point
• Engage the positioning tab on the front cover with the
positioning hole on plate D.
1
Torque
0.59 – 0.98 N
·
m
1
1
Taptite, Cup B
M4X10
Color; Silver
16
Front cover assembly (button attachment)
1. Attach the SS button
1
, operation button
2
, and thread button
3
to the
rear of the front cover.
2 3
1