Register the Favorite Scan Settings Using ControlCenter2 (CUSTOM SCAN) (Macintosh)
file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter3_6.html[3/11/2013 10:25:57 AM]
Brightness
Adjust the setting (0 to 100) to get the best image. The
default value of 50 represents an average and is
usually suitable for most images. You can set the
Brightness
level by dragging the slider to the right or
left to lighten or darken the image. If the scanned
image is too light, set a lower Brightness level and
scan the document again. If the image is too dark, set
a higher Brightness level and scan the document
again.
Yes
Yes
Yes
Yes
Contrast
Adjust the setting (0 to 100) to get the best image. The
default value of 50 represents an average and is
usually suitable for most images. You can increase or
decrease the contrast level by moving the slider to the
right or left. An increase emphasizes dark and light
areas of the image, while a decrease reveals more
details in gray areas.
Note
The
Contrast
setting is only available when
setting
Scan Type
to
Auto
,
Gray (Error
Diffusion)
,
True Gray
or
24bit Color
.
Yes
Yes
Yes
Yes
Duplex(two-
sided) Scanning
If you check this box, the machine scans both sides of
the document. When using the automatic 2-sided
(duplex) scan feature, you must select
Long-edge
binding
or
Short-edge binding
depending on the
layout of your original to make sure that the data file
created appears correctly in the scanned document.
Note
The 2-sided (duplex) scanning feature is available
with lengths up to Legal size.
Yes
Yes
Yes
Yes
Restore Defaults
Restore all settings to their factory default values.
Yes
Yes
Yes
Yes
Continuous
Scanning
You can scan multiple batches of documents and put
them together into one data file. After the first batch of
documents is scanned, click
Continue
for additional
pages or
Finish
. This operation enables you to scan
more sheets than the maximum capacity of the
document feeder.
Yes
Yes
Yes
Yes
Carrier Sheet
Mode
You can scan the following documents using the
Carrier Sheet. For this mode, you can select any
setting other than
Auto
from the
Document Size
drop-
down list.
• Large-sized Documents (A3, B4 and Ledger)
Fold the document in half and insert it in the Carrier
Sheet for 2-sided (duplex) scanning, then both front
and back pages will be combined into a single page.
Yes
Yes
Yes
Yes