Brother HL-S7000DN Series Скачать руководство пользователя страница 375

Страница: 375 / 460

4-32

Confidential

6.2 Supply of Water

(1) Open the ink cartridge cover and turn ON the machine.

(2) Enter the maintenance mode, and press the

and

buttons in this order.

"PlatenPosition" is displayed on the LCD.

(3) Set the ink cartridge in the machine.

(4) Select "OptimizerSupply" using the

button, and press the

button.

(5) Select "SUPPLY OPTIMIZER" using the

button, and press the

button.

The machine starts supplying water.

(6) When the machine finishes supplying water, turn the power OFF and ON.

6.3

Supply of Ink to Drive Switching Unit and Check of Ink Leak

(1) Check that the ink cartridge is installed.

(2) Press the

and

buttons in this order in the initial state of the maintenance mode.

"Cartridge" is displayed on the LCD. If the machine displays "No Cartridge" on the LCD,
press the

button to display "Cartridge" on the LCD.

(3) Press the

button. "NORMAL_P ALL" is displayed on the LCD.

(4) Press the

button to display "POWER_P ALL" on the LCD.

(5) Press the

button. The machine displays "EXECUTING" on the LCD and starts

supplying ink.

(6) Check that no ink is leaking from the junctions between the tubes while ink is being

supplied.

(7) When the machine finishes supplying ink, it displays "COMPLETED" on the LCD.

(8) Press the

button to return to the initial state of the maintenance mode.

(9) Press the

button twice to return to the ready state.

6.4 Resetting of Drive Switching Unit Counter

(1) While the machine is in the ready state, press the

and

buttons at the same time.

"Reset Menu" is displayed on the LCD.

(2) Press the

button to select drive switching unit, and press the

button.

"1.Reset 2.Exit" is displayed on the LCD.

(3) Press the

button. The machine displays "Accepted" on the LCD. The replacement

counter of the drive switching unit increases, and the machine returns to the ready state.

(4) Turn OFF the power of the machine.

6.5 Attachment of Side Cover L

(1) Attach the side cover L.

Содержание HL-S7000DN Series













































































































































































































































































































































































































































































Результаты поиска

Содержание HL-S7000DN Series

Отзывы:

Похожие инструкции для HL-S7000DN Series

Бренды по названию

Популярные бренды

Brother HL-S7000DN Series, Руководство по обслуживанию

Результаты поиска

Содержание HL-S7000DN Series

Отзывы:

Похожие инструкции для HL-S7000DN Series

Бренды по названию

Популярные бренды