manualshive.com logo in svg

Brother HL-720, Руководство по обслуживанию

Поделиться
Скачать
Brother HL-720 Скачать руководство пользователя страница 168

USER’S GUIDE

CHAPTER 3 –2

Data (Toner) Lamp

The Data lamp indicates the current status of the print data process.

Lamp Printer status

Off

❍

The printer has no print data.

Blinking

❍↔●

The printer is receiving data from the computer or
the printer is processing data in memory.

On

●

Print data remains in the printer memory. If the Data
lamp is on for a long period of time and nothing has
printed, you need to press the switch to print the
remaining data.

This lamp also works as the Toner lamp with the Alarm lamp. They blink
simultaneously to indicate a toner error. See

 “REPLACING THE TONER

CARTRIDGE”

 in Chapter 5 and

 “Operator Calls”

 in Chapter 6.

Drum Lamp

The Drum lamp indicates the drum unit is nearly at the end of its life.

Lamp Printer status

Off

❍

The drum unit can be used.

On

●

The drum unit is nearly at the end of its life.
Installing a new drum unit turns off this lamp. See

“REPLACING THE DRUM UNIT”

 in Chapter 5.

Alarm Lamp

The Alarm lamp blinks to indicate a printer error status such as “Cover
Open” and “Memory Full.” If any other error occurs, the printer indicates
the error by blinking the Alarm lamp with another lamp or by printing an
error report.

✒

Note

The Ready, Data and Drum lamps are used to indicate printer errors with
the Alarm lamp. See

 “ALARM INDICATIONS AT A GLANCE”

 in

Chapter 6 and take corrective action for the error.

Содержание HL-720
























































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды