manualshive.com logo in svg

Brother HL-5580D, Руководство по обслуживанию, Страница: 363 / 433

Поделиться
Скачать
Brother HL-5580D Скачать руководство пользователя страница 363

5-14

Confidential

1.3.7 Change OnePushDemo function setting (function code: 28)

<Function>

This function is used to implement Demo printing by pressing a certain key, and is mainly 
used for sales promotion at dealers. This function is disabled once printing is performed from 
the computer. Change the setting to enable the function again.

OnePushDemo = ON(Enabled) / OFF(Disabled). 

The setting currently selected is marked "*".

<Operating Procedure>

Non touch panel models

(1) Press the [

▲

] or [

▼

] key in the initial 

state of maintenance mode to display 
"MAINTENANCE 28" on the LCD, and 
press the [OK] key. 
"OnePushDemo=ON" is displayed on 
the LCD.

(2) Press the [

▲

] or [

▼

] key to display 

"OnePushDemo=ON" when enabling 
this function or "OnePushDemo=OFF" 
when disabling this function.

(3) Press the [OK] key. The setting 

currently displayed is saved, and the 
machine returns to the initial state of 
maintenance mode.

Touch panel models

(1) Press the [2], and then the [8] key in 

the initial state of maintenance mode. 
"OnePushDemo=ON" is displayed on 
the LCD.

(2) Press the [

˄

] or [

˅

] key to display 

"OnePushDemo=ON" when enabling 
this function or "OnePushDemo=OFF" 
when disabling this function.

(3) Press the [SET] or [Mono] key. The 

setting currently displayed is saved, 
and the machine returns to the initial 
state of maintenance mode.

Note:

• To cancel operation and return to the initial state of maintenance mode, press the [X] key.

• Once the OnePushDemo function is enabled, this will not be disabled even when 

printing is performed from the computer as long as the power switch is not turned OFF. 
However, if the power switch is turned OFF and then ON again after the OnePushDemo 
function was enabled, this function will be disabled when printing is performed from the 
computer.

Содержание HL-5580D


















































































































































































































































































































































































































































Отзывы:

Нет отзывов