Brother HL-5580D, Руководство по обслуживанию

Страница: 127 / 433

2-101
Confidential

Poor fixing
 Completely blank
<User Check>
- Check the usage environment of the machine. Using the machine in
hot-humid or cold-dry conditions can cause this problem.
- Clean the corona wire of the drum unit.
- Replace the drum unit with a new one.
- Replace the toner cartridge with a new one.
Step Cause Remedy
1
Dirt on the electrodes of the toner
cartridge and those of the machine Clean the electrodes of the toner cartridge
and those of the machine. (Refer to
Fig. 2-6
and Fig. 2-7 .)
2 Fuser unit failure Replace the fuser unit.
3
High-voltage power supply PCB
failure Replace the high-voltage power supply PCB
ASSY.
4
Low-voltage power supply PCB
failure Replace the low-voltage power supply PCB
ASSY.
5 Laser unit failure Replace the laser unit.
6 Main PCB failure Replace the main PCB ASSY.
<User Check>
- Clean the corona wire of the drum unit.
- Replace the drum unit with a new one.
- Replace the toner cartridge with a new one.
- Install the latest main firmware.
Step Cause Remedy
1
Dirt on the electrodes of the drum
unit and those of the machine Clean the electrodes of the drum unit and
those of the machine. (Refer to
Fig. 2-6 and
Fig. 2-7 .)
2
Dirt on the electrodes of the toner
cartridge and those of the machine Clean the electrodes of the toner cartridge
and those of the machine. (Refer to
Fig. 2-6
and Fig. 2-7 .)
3
Connection failure of the laser unit
flat cable Reconnect the laser unit flat cable.
4 Laser unit attachment failure Reattach the laser unit.
5 Laser unit flat cable failure Replace the laser unit flat cable.
6
Dirt on the electrodes of the
machine Clean the electrodes of the machine.
(Refer to
Fig. 2-7 .)
7 Laser unit failure Replace the laser unit.
8 Main PCB failure Replace the main PCB ASSY.