Control panel features
119
8
Enabling or disabling the wireless network (For HL-5370DW)
8
If you want to switch the wireless network to enabled/disabled (disabled is the default), please follow these
steps:
a
Make sure that the power cord is plugged in.
b
Turn on the machine and wait until the machine is in the Ready state.
c
Hold down
Go
for 10 seconds. Release
Go
when the printer prints a Network Configuration page that
indicates the current network settings.
Note
If you release
Go
in less than 10 seconds, the printer will change to the reprint mode.
d
Check the text to the right of
IEEE 802.11b/g
in the
Node Type
section.
Active
means that the wireless
setting is enabled and
Inactive
means that the wireless setting is disabled.
Note
You can switch the wireless network to enabled/disabled, using the BRAdmin applications or Web Based
Management (web browser). For more information, see
Changing the print server settings
