4. Control Panel
55
Using the control panel LCD menu
When you use the Menu buttons (
+
,
-
,
Set
or
Back
), remember the following basic steps:
If no control panel operations are performed for 30 seconds, the LCD automatically returns to
READY
.
When you press
Set
to choose a setting, an asterisk appears at the end of the LCD for a short time. After
that, the LCD returns to the previous menu level.
After changing the status or a setting, pressing
Back
before you press
Set
will cause the LCD to return to
the previous menu level with the original settings unchanged.
There are two ways to input numbers. You can press the
+
or
-
button to scroll up or down one number at
a time, or you can hold down the
+
or
-
button to scroll faster. The blinking number is the one that you can
change.
For example: If you feed paper from the MP tray as a priority, change the MP FIRST setting
to ON as follows.
The default setting is
OFF
. Turn this setting
ON
if you want to.
a
Press any of the
Menu
buttons (
+
,
-
,
Set
or
Back
) to take the printer offline.
READY
h
INFORMATION
b
Press the
+
or
-
button to choose
PAPER
.
PAPER
c
Press
Set
to move to the next menu level.
SOURCE
d
Press the
+
or
-
button to choose
MP FIRST
.
MP FIRST
e
Press
Set
.
=OFF *
f
Press the
+
button to choose
ON
.
=ON
g
Press
Set
.
An asterisk * briefly appears at the end of the LCD.
The current setting is shown by an *.
=ON *
