General Information
96
3
1
### means a number within the range of 000 to 255. On connection to the network, if the machine's 'Boot Method' is 'Auto' the machine will attempt
to set the IP address and Subnet Mask from a boot server such as DHCP or BOOTP. If a boot server cannot be found, an APIPA IP address will
be allocated, such as 169. 254. [001-254]. [000-255]. If the 'Boot Method' of the machine is set to 'Static' you will need to manually enter an IP
address from the machine's control panel.
Reset Menu
3
Wi-Fi Direct
(Continued)
Device Info.
(Continued)
IP Address
-
Shows the IP Address of your
machine.
Status Info.
Status
G/O Active(**)
/
Client Active
/
Not Connected
/
Off
/
Wired LAN Active
**
= the number of devices
Shows the Wi-Fi Direct™
network status.
Signal
Strong
/
Medium
/
Weak
/
None
Shows the Wi-Fi Direct™
network signal strength.
When your machine acts as
the Group Owner, the LCD
always shows
Strong
.
Channel
-
Shows the channel in use
when the
Status
is
G/O Active(**)
or
Client Active
.
Speed
-
Shows the connecting speed
when the
Status
is
G/O Active(**)
or
Client Active
.
I/F Enable
-
On
/
Off
*
Enables or disables the Wi-Fi
Direct™ connection.
Network Reset
Restores all network settings of the internal print server to the factory default.
Display Shows
Description
Network
Restores all network settings of the internal print server to the factory default.
Factory Reset
Resets the machine and restores the printer settings (including command settings) to the
factory default settings.
The factory settings are shown in Bold with an asterisk.
Network Menu for HL-3170CDW (continued)
Submenu 1
Submenu 2
Menu Selections
Options
Descriptions
The factory settings are shown in Bold with an asterisk.
