Brother HL-3040CN, Руководство по обслуживанию

Страница: 357 / 437

7-3
Confidential
1.4 Detailed Description of Maintenance-mode Functions
1.4.1 EEPROM parameter initialization (Function code 01, 91)
<Function>
This function initializes the setting values of the operation parameters, user switches, and
worker switches (WSW) registered in the EEPROM.
Entering function code 01 initializes almost all of the EEPROM areas, but entering 91 does not
initialize some areas, as listed below.
<Operating procedure>
(1) Press the or button to display “MAINTENANCE 01” (or “MAINTENANCE 91”
according to your need) on the LCD in the initial state of the maintenance mode.
Then, press the
OK button. The “PARAMETER INIT” appears on the LCD.
(2) Upon completion of parameter initialization, the machine returns to the initial state of the
maintenance mode.
Data item Function code 01 Function code 91
User switches (Items to be initialized
when resetting to the factory default
settings)
All of these will be
initialized.
These will be
initialized.
Worker switch
(Refer to
APPENDIX 1 .)
These will not be
initialized.
Function settings except user switches
(Items except the factory default
settings)
- Languages
- Reprint
- Secure Print
- Interfaces
These will be
initialized.
LAN area (Network settings)
PCL core area
(Emulation settings) (HL-3070CW only)
Operation lock of the control panel
password These will not be
initialized.