Brother HL-2400Ce Series, Руководство пользователя

Страница: 77 / 256

CHAPTER 4 CONTROL PANEL
4–13
MODE Button Settings in BR-Script 2 Mode
The following table shows all the selections you can choose with the
Mode
button in the BR-Script 2 mode.
✒
Note
The mode menus and settings that appear will vary according to the
current emulation mode, printer status and any options that may be
installed in the printer.
Mode Menu Setting Menu Sub-Setting Menu Setting
INTERFACE MODE
Same as HP PCL5C Mode
FORMAT MODE PAGE FORMAT MODE PAPER=LETTER
(For 120V model)
PAPER=A4
(For 220/240V model)
LETTER, LEGAL, A4, A5, B5,
JIS B5, EXECUTIVE, COM10,
and DL
X OFFSET=0 -500 (left) to +500 (right) dots
Y OFFSET=0 -500 (down) to +500 (up) dots
exit Exit to PAGE FORMAT MODE
COLOR MODE Same as PCL5C mode
exit Exit to PAGE FORMAT MODE
RESOLUTION MODE RESOLUTION RESOLUTION=600 300 or 600 dpi
CAPT SETTING CAPT=ON ON or OFF
HRC SETTING HRC=MEDIUM OFF, LIGHT, MEDIUM, or DARK
exit Exit to RESOLUTION MODE
DEVICE OPERATION When the commercial flash memory card or the HDD card has not been formatted:
DEVICE1
DEVICE2
DEVICE3
exit
FORMAT DEVICE Format the flash memory card,
HDD card or optional HDD.
Exit Exit to DEVICE OPERATION
DEVICE OPERATION When the commercial flash memory card, HDD card or optional HDD has been formatted:
DEVICE1 EXECUTE DATA Execute the data on the DEVICE.
DEVICE2 DATA ID=##### Execute the selected data.
DEVICE3
DEVICE LIST Print the contents of the DEVICE.
SAVE SAVE DATA Send data to be saved.
SET KEY--> END End saving the data.
DATA ID=##### Set data ID for saved data.
Exit Exit to DEVICE OPERATION
DELETE MACRO ID=##### Delete the selected macro.
DATA ID=#### Delete the selected data.
FONT ID=##### Delete the selected font.
FORMAT DEVICE Format the DEVICE.
SET –> DELETE ALL Execute formatting the DEVICE.
Exit Exit FORMAT DEVICE
OPERATION
exit Exit to DEVICE OPERATION