Brother HL-2060, Руководство пользователя

Страница: 74 / 286

CHAPTER 3 BEFORE WORKING WITH THE PRINTER
3–15
Fig. 3-4 Cassette Feed
Manual Feed
When you set paper in the multi-purpose tray with the setting MANUAL
FEED = ON selected with the FEEDER switch, the printer loads paper
only from the multi-purpose tray regardless of the previous feeder
selection. When you select the setting PAPER IN = CONT in the MP
TRAY SETTING mode, the printer loads paper automatically from the
multi-purpose tray. When you select the setting PAPER IN = STOP, the
printer waits for you to press the SEL key to start printing. You can set
the paper feed mode and the paper size with the FEEDER switch.
For
further information, see “FEEDER Switch” in Chapter 4.
✒
Note
When you feed paper manually, note the following:
•
If your application software supports a manual feed selection in the
print menu, you can select it through the software. Since the software
or command setting overrides the switch setting, you do not need to
set the manual feed mode and the paper size with the FEEDER switch.
•
If you use pre-printed paper in the multipurpose tray, please note that
it is inserted with the pre-printed side face up. Insert the top of the
page towards the printer in the multi-purpose tray.
Multi-purpose
Tray (MP)
Upper Paper
Cassette (Tray 1)
Lower Paper
Cassette (Tray 2)