1-8
Choose a Location
Please take note of the following before using the printer.
Power Supply
•
Use the printer within the specified power range.
AC power: ±10% of the rated power voltage in your country
Frequency: 50 Hz (220 V– 240 V) or 50/60 Hz (110–120 V)
•
The power cord, including extensions, should not exceed 5 meters (16.5
feet).
•
Do not share the same power circuit with other high-power appliances,
particularly an air conditioner, copier or shredder. If you must use the
printer with these appliances, we recommend that you use an isolation
transformer or a high-frequency noise filter.
•
Use a voltage regulator if the power source is not stable.
Environment
The printer should be installed near a power outlet, that is easily accessible.
•
Use the printer only within the following ranges of temperature and
humidity.
Ambient
temperature: 10
°
C to 32.5
°
C (50_F to 90.5_F)
Ambient humidity:
20% to 80% (without condensation)
•
The printer should be used in a well ventilated room.
•
Place the printer on a flat, horizontal surface.
•
Keep the printer clean. Do not place the printer in a dusty place.
•
Do not place the printer where the vent for the printer fan is blocked. Keep
approximately 100 mm (3.4 inches) between the fan vent and the wall.
•
Do not place the printer where it will be exposed to direct sunlight. Use a
blind or a heavy curtain to protect the printer from direct if you must place
it near a window.
