Troubleshooting and other information
46
A
Toner Setting
A
The printing operation varies depending on the machine setting:
Default setting (Stop mode)
The machine will stop printing until you replace the toner cartridge with a new one when the LEDs indicate
Replace Toner
.
Continue mode
To force the machine to continue printing after the LEDs indicate
Replace Toner
, press
seven times
to enter Continue mode (all the LEDs blink twice, and then the
Ready
LED (
) turns on). The machine
will continue printing until the LEDs indicate
Toner Ended
.
To return to the default setting (Stop mode), press
seven times (all the LEDs blink once).
NOTE
• Make sure that the top cover is closed before you change the mode.
• When the LEDs indicate an error mode, you cannot change the mode.
• If you continue printing in the Continue mode, we cannot guarantee the print quality.
• While using Continue mode the print may appear faint.
