manualshive.com logo in svg

Brother FAX-8360P, Руководство пользователя

Поделиться
Скачать
Brother FAX-8360P Скачать руководство пользователя страница 46

36

   Chapter 6

Broadcasting

Broadcasting is automatically sending the same fax message to multiple fax numbers. Using the 

Broadcast

 key, you can include up to 32 One Touch locations, up to 200 Speed Dial locations, and 

up to 50 manually dialled numbers (maximum of 282 locations if you did not use up any locations 
for Groups, access codes or credit card numbers). However, available memory will vary with the 
types of jobs in memory and numbers of locations used for broadcasting. If you broadcast to more 
than the maximum locations available, you will not be able to setup transmissions using dual access 
and the timer.

The easiest way to broadcast is to first combine frequently used One Touch and Speed Dial numbers 
as a Group, which uses up a One Touch key or a Speed Dial #. (Remember, you can have up to six 
Groups and Quick Dial numbers can be included in more than one Group). Then by pressing 

Broadcast

 between each location, you can include One Touch, Speed Dial, Groups, and manual 

dialling (using the dial pad) in the same broadcast. Use 

Search/Speed Dial

 to help you choose the 

numbers easily.

After the broadcast is completed, a Broadcast Report will be printed automatically to let you know 
the results.

1

Insert the document face down in the Automatic Document Feeder.

2

Enter a number using One Touch, Speed Dial, Search, Group number or the dial pad.
Example: Group number

3

Press 

Broadcast

. You will be prompted to enter the next number.

4

Enter the next number.
Example: Speed Dial

5

Press 

Broadcast

.

6

Enter the next fax number.
Example: Manual dialling, using the dial pad.

7

Press 

Fax Start

.

The machine will read the documents into memory and then start sending faxes to all the numbers 
you entered.

■

To skip one of the locations in broadcasting, press 

Stop/Exit

 whilst that number 

is being dialled. To cancel all locations, press 

Menu

, 

2

, 

6

. The locations, which 

were cancelled, are printed on the Broadcast Report.

■

Enter the long dialling sequence numbers as you normally would, but keep in 
mind that each key counts as one location, so the number of locations you can 
call becomes limited.

■

If the line is busy or a connection could not be made for some other reasons 
while broadcasting, the machine will redial the number automatically.

■

If the memory is full, press 

Stop/Exit

 to abort the job or press 

Fax Start

 to send 

the portion that is in the memory (if more than one page has been scanned).

Содержание FAX-8360P































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды