Brother E300 Скачать руководство пользователя страница 25

Страница: 25 / 60

GET

G S

ARTED

Turning Power On/Off

Press the

Power

key to turn the P-touch on.

Press the

Power

key again to turn the P-touch off.

Auto Power-Off Time

Feed function

The Feed function will feed 23 mm of blank tape.

Press the

Shift

key and then press the

Preview

key.

The message “Feeding Tape... Please Wait” appears while the tape is fed.

•

Do not pull the label coming out of the tape exit slot. Doing so will cause the ink ribbon to

be discharged with the tape.

• Store tape cassettes in a cool dark location, away from direct sunlight and high temperature, high

humidity, or dusty locations. Use the tape cassette as quickly as possible after opening the sealed

package.

Extra Strength Adhesive Tape:

• For textured, rough, or slipping surface, we recommend using Extra Strength Adhesive Tape.
•

Although the instruction sheet included with the Extra Strength Adhesive Tape cassette
recommends cutting the tape with scissors, the tape cutter that this P-touch is equipped

with is able to cut Extra Strength Adhesive Tape.

Turning Power On/Off

• Your P-touch has a power saving feature which automatically turns itself off (under certain

operating conditions) if no key is pressed for a period of time. See the Auto Power-Off Time

table below for details.

• If the batteries are installed (or the P-touch is connected to an electrical outlet with the

AC adapter), the previous session’s information is displayed when the power is turned on.

With AC adapter

5 minutes

With battery

5 minutes

Feeding Tape

•

Do not pull the label coming out of the tape exit slot. Doing so will cause the ink ribbon to

be discharged with the tape.

• Do not block the tape exit slot during printing or when feeding tape. Doing so will cause the tape

to jam.

1
2

Содержание E300





























































Результаты поиска

Содержание E300

Отзывы:

Бренды по названию

Популярные бренды

Brother E300, Руководство пользователя

Результаты поиска

Содержание E300

Отзывы:

Бренды по названию

Популярные бренды