manualshive.com logo in svg

Brother E300, Руководство пользователя

Поделиться
Скачать
Brother E300 Скачать руководство пользователя страница 23

z

 GET

T

IN

G S

T

ARTED

21

Power Supply

1

2

3

4

5

6

7

8

9

Battery

After making sure that the power is off, remove the 

rear cover on the back of the labelling system. If the 

batteries are already in the labelling system, 

remove them.

Insert six new AA-size alkaline batteries (LR6), 

or fully charged Ni-MH rechargeable batteries 

(HR6), making sure that the positive (+) and 

negative (-) ends of the batteries match the 

positive (+) and negative (-) marks inside the 

battery compartment.

Users of alkaline batteries

23

Users of Ni-MH rechargeable batteries

Attach the rear cover by inserting the three hooks 

at the bottom into the slots on the labelling system, 

then pushing down firmly until it snaps into place.

Make sure that the power is turned off when 
replacing batteries.

1

Always replace all six batteries at the same 
time using brand new ones.

Always replace all six batteries at the same 
time with fully charged ones.

Visit us at http://solutions.brother.com/ for the 
latest information about recommended 
batteries.

2

3

Remove the batteries if you do not intend to use the P-touch for an extended period of time.

Содержание E300





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды