Brother DCP-L8400CDN Скачать руководство пользователя страница 455

Страница: 455 / 515

5-71

Confidential

2.2

Drum Cleaning

<Function>

This function is to attach a special cleaning sheet on the drum unit and perform the cleaning of
the drum.

<Operating procedure>

(1) Press the

(

Settings) key in the ready state.

(2) Press the

All Settings

key.

(3) Press the

key to display “Machine Info.” and then press the

Machine Info.

key.

(4) Press the

key to display “Parts Life” and then press the

Parts Life

key.

(5) Hold down any of the keys in the ten-key pad, which is OFF, for approximately 0.5

second.
Then, the ten-key pad is displayed.

(6) Hold down the

key for 5 seconds or more. “Attach the cleaning sheet. Please refer to the

included instructions.” is displayed on the LCD.

(7) Open the front cover, take out the drum unit, and attach the cleaning sheet on the drum

unit. (For the method of attaching the cleaning sheet, refer to the insertion of the cleaning
sheet.)

(8) Put the drum unit back in the machine and close the front cover. “Please wait” is displayed

on the LCD, and then drum cleaning starts.

(9) When drum cleaning is completed, “Drum Cleaning completed. Remove the cleaning

sheet.” is displayed on the LCD. Then, open the front cover, take out the drum unit, and
remove the cleaning sheet from the drum unit.

(10) Put the drum unit back in the machine and close the front cover. Then the machine

returns to the ready state.

Содержание DCP-L8400CDN




































































































































































































































































































































































































































































































































Результаты поиска

Содержание DCP-L8400CDN

Отзывы:

Похожие инструкции для DCP-L8400CDN

Бренды по названию

Популярные бренды

Brother DCP-L8400CDN, Руководство по обслуживанию

Результаты поиска

Содержание DCP-L8400CDN

Отзывы:

Похожие инструкции для DCP-L8400CDN

Бренды по названию

Популярные бренды