manualshive.com logo in svg

Brother DCP-9055CDN, Руководство по обслуживанию

Поделиться
Скачать
Brother DCP-9055CDN Скачать руководство пользователя страница 468

5-69

Confidential

2.4 How to Recover from Errors of the Fuser Unit

How to recover from errors of the fuser unit is to use 

Function code 99

 in the maintenance 

mode.

<Operating procedure>

(1) Press the 

Menu

 button and then the 

Start/Black

 button while the machine is in the ready 

state.  Next, press the

button four times to enter the maintenance mode.

(2) The machine beeps for one second and displays "

" on the LCD, 

indicating that it is placed in the initial state of the maintenance mode, a mode in which the 
machine is ready to accept entry from the buttons.

(3) To exit from the maintenance mode and switch to ready state, press the 

9

 button twice in 

the initial state of the maintenance mode.

2.5 Drum Cleaning

■

Drum cleaning function overview

This function is to attach a special cleaning sheet on the drum and perform the cleaning of the 
drum.

<Operating procedure>

(1) Press the 

Cancel

 button and

button while the machine is in the ready state.

"Drum Cleaning/Attach the cleaning sheet.  Please refer to the included instructions." is 
displayed on the LCD.

(2) Open the front cover, take out the drum unit, and attach the cleaning sheet on the drum 

unit. (For the method of attaching the cleaning sheet, refer to the insertion of the cleaning 
sheet.)

(3) Mount the drum unit to the machine and close the front cover.

"Drum Cleaning/Please wait" is displayed on the LCD, and then drum cleaning starts.

(4) After a while, "Drum Cleaning/Drum Cleaning completed.  Remove the cleaning sheet." is 

displayed on the LCD, and drum cleaning is completed.  Then, open the front cover, take 
out the drum unit, and remove the cleaning sheet from the drum unit.

(5) Mount the drum unit to the machine and close the front cover, and the machine goes back 

to the ready state.

Memo:

FAX models equipped with numerical keypads can enter the maintenance mode in the 
same way as conventional models; that is, by pressing the 

Menu

, 

*

, 

2

,

 8

, 

6

 and 

4

 buttons in 

this sequence.

WARNING

When clearing an error, be sure that the fuser unit is cooled down sufficiently.  If an error is 
cleared while the fuser unit is not cooled down, there is a possibility that the unit might be 
unable to be repaired.

Note: 

If the machine is not operated for 1 minute while it is in the state of the procedure (1), it 
goes back to the ready state.

Содержание DCP-9055CDN





















































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды